Wiha 32800 Insulated Tool Set with Screwdrivers, Nut Drivers, Pliers, Cutters, Ruler, Knife and Sockets in Rolling Tool Case, 10,000 Volt Tested and 1000 Volt Rated, 80-Piece Set

Description

Wiha 32800 Insulated Tool Set with Screwdrivers, Nut Drivers, Pliers, Cutters, Ruler, Knife and Sockets in Rolling Tool Case, 80-Piece Set Includes

Long Nose Pliers: 6.3, 8.0″
Bent Nose Pliers: 6.3″
Long Flat Nose Pliers: 6.3″
Combo Pliers / Crimpers:9.0″
Diagonal Cutters: 6.3″
High Leverage Cutters: 8.0″
Cable Cutters: 6.3″
Stripping Pliers: 6.3″
Adjustable Wrench:8.0″
Inch Insulated Sockets: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8″
Metric Insulated Sockets: 13.0, 14.0, 15.0, 17.0, 19.0, 20.0, 22.0mm
Inch Insulated Nutdrivers: 7/32, 1/4, 5/16, 3/8, 7/16″
Metric Insulated Nut Drivers: 5.0, 5.5, 6.0, 7.0, 8.0, 10.0, 13.0mm
Insulated Cable Knife: 50mm
2 Meter RulerInch / Metric
Insulated Ratchet: 3/8″ Drive
Insulated Extension Bar: 3/8 x 4.9″
Single Pole Voltage Detector
Insulated Slotted Drivers: 2.5, 3.0, 3.5, 4.0, 4.5, 5.5, 6.0, 6.5, 8.0, 10.0mm
Insulated Phillips Drivers: #0, #1, #2, #3
Insulated Slt/Ph Terminal Drivers: #1, #2
Insulated Square Drivers: #1, #2
Insulated Torx Drivers: T6, T7, T8, T9, T10, T15, T20, T25, T30
Insulated Inch T-handles: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8″
Insulated Metric T-handles: 4.0, 5.0, 6.0, 8.0mm
Insulated L-Key: 10mm, 1/2″

Specifications & Standards: EN/IEC 60900 ASTM F-1505-01 VDE 0682/part 201 DIN 7437 NFPA70E & CSA

Insulated Tools are intended to provide protection against accidental contact with charged energized circuits. For maximum safety we recommend de-energizing all circuits whenever possible before starting work on electrical apparatus or conductors. Always visually inspect insulation on tools before use, do not use tools if insulation shows signs of wear or damage to the insulated areas of the tool. Wear appropriate eye protection when using hand tools. Use NFPA70E certified insulated protective outer wear when appropriate

Includes: 6.3”Long Nose Pliers|6.3”Diagonal Cutters|8.0”Long Nose Pliers|8.0”High Leverage Cutters|6.3”Bent Nose Pliers|6.3”Cable Cutters|6.3”Long Flat Nose Pliers|6.3”Stripping Pliers|9.0”Combo Pliers/Crimpers|8.0”Adjustable Wrench|Slotted|Phillips|Xeno Slotted|Phillips Terminal|Square|TORX|Cable Knife|2 Meter Ruler|Inch Sockets|Metric Sockets|Ratchet 3/8”Drive|4.9” Extension 3/8”Drive|SAE Nut Drivers|Nut Drivers|T-handle SAE Hex|T-handle METRIC Hex|L-key|Cat. III Voltage Detector|Rolling Case
Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind
Lockable Rolling Water Tight Case Keeps Your Tools Secure
Each Tool Has a Dedicated Position For Easy Storage Retrievals
Rigorous heat-treatment process for maximum strength