Flipsky Brushless Sensored Motor with Pulley for Electric Bike/Skateboard BLDC Belt Motor 6354 190KV 2450W Shaft 8mm High Efficiency Esk8 Motors with High Torque 7Nm Dustproof Motor e-Bike Motor

Description

Product Spec:

• Max Power: 2450 Watts
• Max Current: 65 Amps
• Max Volts: 12S
• Max Torque: 7Nm
• Motor Resistance: 0.053Ohm
• Recommend ESC: 3-12S 50A ( FSESC4.12 50A or FSESC 6.6 60A )
• Weight: 1.23 lb / 0.56 kg
• The motor length:54mm
• The motor diameter: 63mm
• SHAFT: Diameter 8mm, 24mm length, 3x3x15mm keyway slot.
• Motor Wire: 130mm silicone 12AWG wire with 4.0mm Gold Bullet Connector Male.

Wire configuration:

• Blue = A
• Black = B
• Yellow = C
• BLDC Motor
• The number of pole: 14
• Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch

Internal PCB with 120 Degree Hall Effect Sensors.

Motor can be used with or without a sensor. Sensorless operation is most common.

ESC Sensor Wires required to use with ESC.

Wire configuration:

• Red = 5v
• Blue = A
• Yellow = C
• Green = B
• Black = GND

What’s Our Product Feature?

• Stator: Lamination Japan steel
• 12awg high strand silicone wire with 4.0mm gold bullet connectors.
• Both support sensor and sensorless mode!

【High efficiency】Setup was quick, 7Nm High Torque, Solid torque output and braking, use with ESC which works perfectly. With the Hall sensor, it is the first choice for stable operation.
【Strong power】This Esk8 motors test has passed more than 200+ miles, rotating from stationary to ~ 30 rpm.
【Wheel customizability】Can be used in DIY Electric Skateboard Electric Bike 、Surfboard ,ect.
【Powerful system】The Max Output Watt is 2450W, Max Current: 65 Amps,Max Volts: 12S .Recommend ESC is 3-12S 50A (eFSESC4.12 50A or FSESC 6.6 60A)
【Decend design】Good finishing on the whole outer body to Enable Motors Dustproof , with sturdy shaft & Lamination Japan steel startor, used 12awg high strand silicone wire with 4.0mm gold bullet connectors.